ИНТЕРНЕТ ВЕЩЕЙ (IOT) В МАШИНОСТРОЕНИИ: ПРИМЕНЕНИЕ И ПЕРСПЕКТИВЫ

  • Рубидинов Шохрух Гайратжон угли Старший преподаватель (PhD) Ферганского политехнического института, Фергана, Узбекистан
  • Ураимов Мухаммаддиёр Баходир угли Ферганский политехнический институт, студент 3-го курса
Keywords: интернет, IOT, машиностроение, мониторинг, процесс, управление, качество

Abstract

Интернет вещей (IOT) имеет огромный потенциал для применения в машиностроении. Он позволяет собирать и анализировать данные, управлять устройствами и оптимизировать производственные процессы.

References

1. Qosimova, Z. M., & RubidinovSh, G. (2021). Influence of The Design of The Rolling Roller on The Quality of The Surface Layer During Plastic Deformation on the Workpiece. International Journal of Human Computing Studies, 3(2), 257-263.
2. Рубидинов, Ш. Ғ. У., Қосимова, З. М., Ғайратов, Ж. Ғ. У., & Акрамов, М. М. Ў. (2022). МАТЕРИАЛЫ ТРИБОТЕХНИЧЕСКОГО НАЗНАЧЕНИЯ ЭРОЗИОННЫЙ ИЗНОС. Scientific progress, 3(1), 480-486.
3. Косимова, З. М., & Акрамов, М. М. Ў. (2021). Технологические особенности изготовления поршней. Scientific progress, 2(6), 1233-1240.
4. Medatovna, K. Z., & Igorevich, D. D. (2021). Welding Equipment Modernization. International Journal of Human Computing Studies, 3(3), 10-13.
5. Косимова, З. М. (2022). Анализ Измерительной Системы Через Количественное Выражение Ее Характеристик. Central Asian Journal of Theoretical and Applied Science, 3(5), 76-84.
6. Medatovna, Q. Z. (2023). Methods of Manufacturing Models From Polystyrene Foam. Central Asian Journal of Theoretical and Applied Science, 4(5), 11-15.
7. Bahodir o‘g‘li, U. M. (2022). Calculation of Tolerances of Landings with A Gap by Software. Eurasian Scientific Herald, 8, 170-175.
8. Tursunovich, M. E. (2022). ROBOTLARNING TURLARI VA ISHLATILISH SOXALARI. Educational Research in Universal Sciences, 1(7), 61-64.
9. Mamurov, E. T. (2022). Diagnostics Of The Metal Cutting Process Based On Electrical Signals. Central Asian Journal of Theoretical and Applied Science, 3(6), 239-243.
10. Mamurov, E. T. (2022). Control of the Process of Cutting Metals by the Power Consumption of the Electric Motor of the Metal-Cutting Machine. Eurasian Scientific Herald, 8, 176-180.
11. Mamurov, E. T. (2022). Study of the Dependences of Specific Energy Consumption on the Elements of the Cutting Mode as an Informative Parameter of the Cutting Process. Middle European Scientific Bulletin, 24, 315-321.
12. Рубидинов, Ш. Ғ. Ў. (2021). Бикрлиги паст валларга совуқ ишлов бериш усули. Scientific progress, 1(6), 413-417.
13. Рубидинов, Ш. Ғ. Ў., & Ғайратов, Ж. Ғ. Ў. (2021). Штампларни таъмирлашда замонавий технология хромлаш усулидан фойдаланиш. Scientific progress, 2(5), 469-473.
14. Рубидинов, Ш. Г. У., & Ғайратов, Ж. Г. У. (2021). Кўп операцияли фрезалаб ишлов бериш марказининг тана деталларига ишлов беришдаги унумдорлигини тахлили. Oriental renaissance: Innovative, educational, natural and social sciences, 1(9), 759-765.
15. Тешабоев, А. М., & Рубидинов, Ш. Ғ. У. (2022). ВАКУУМНОЕ ИОННО-ПЛАЗМЕННОЕ ПОКРЫТИЕ ДЕТАЛЕЙ И АНАЛИЗ ИЗМЕНЕНИЯ ПОВЕРХНОСТНЫХ СЛОЕВ. Scientific progress, 3(2), 286-292.
16. Тешабоев, А. М., Рубидинов, Ш. Ғ. У., & Ғайратов, Ж. Ғ. У. (2022). АНАЛИЗ РЕМОНТА ПОВЕРХНОСТЕЙ ДЕТАЛЕЙ С ГАЗОТЕРМИЧЕСКИМ И ГАЛЬВАНИЧЕСКИМ ПОКРЫТИЕМ. Scientific progress, 3(2), 861-867.
17. Тураев, Т. Т., Топволдиев, А. A., Рубидинов, Ш. F., & Жайратов, Ж. F. (2021). Параметры и характеристики шероховатости поверхности. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 124-132.
18. Akramov, M., Rubidinov, S., & Dumanov, R. (2021). METALL YUZASINI KOROZIYABARDOSH QOPLAMALAR BILAN QOPLASHDA KIMYOVIY-TERMIK ISHLOV BERISH AHAMIYATI. Oriental renaissance: Innovative, educational, natural and social sciences, 1(10), 494-501.
19. Mamirov, A. R., Rubidinov, S. G., & Gayratov, J. G. (2022). Influence and Effectiveness of Lubricants on Friction on the Surface of Materials. Central Asian Journal of Theoretical and Applied Science, 3(4), 83-89.
20. Mamatov, S. A. (2022). Paint Compositions for the Upper Layers of Paint Coatings. Middle European Scientific Bulletin, 23, 137-142.
21. Ruzaliyev, X. S. (2022). Analysis of the Methods of Covering the Working Surfaces of the Parts with Vacuum Ion-Plasmas and the Change of Surface Layers. Eurasian Scientific Herald, 9, 27-32.
22. Шохрух, Г. У. Р., & Гайратов, Ж. Г. У. (2022). Анализ технологической системы обработки рабочих поверхностей деталей вала на токарном станках. Science and Education, 3(8), 23-29.
23. O’G’Li, S. G. A., & O’G’Li, J. G. A. (2022). Ishlab chiqarish va sanoatda kompozitsion materiallarning o’rni. Science and Education, 3(11), 563-570.
24. O'g, R. S. G. A. (2022). Classification of Wear of Materials Under Conditions of High Pressures and Shock Loads.
25. O‘G, R. S. G. A., Obidjonovich, T. F., Oybek O'g'li, O. A., & Bahodirjon O'g'li, L. A. (2023). ANALYSIS OF THE MILLING PROCESSING PROCESS ON THE SHAPED SURFACES OF STAMP MOLDS. European International Journal of Multidisciplinary Research and Management Studies, 3(04), 124-131.
26. Shoxrux G'ayratjon o'g, R., Oybek o'g'li, O., & Bahodirjon o'g'li, L. A. (2022). Effect of Using Rolling Material in the Manufacture of Machine Parts. Central Asian Journal of Theoretical and Applied Science, 3(12), 137-145.
27. Тешабоев, А. Э., Рубидинов, Ш. Ғ. Ў., Назаров, А. Ғ. Ў., & Ғайратов, Ж. Ғ. Ў. (2021). Машинасозликда юза тозалигини назоратини автоматлаш. Scientific progress, 1(5), 328-335.
28. Юсуфжонов, О. Ғ., & Ғайратов, Ж. Ғ. (2021). Штамплаш жараёнида ишчи юзаларни ейилишга бардошлилигини оширишда мойлашни аҳамияти. Scientific progress, 1(6), 962-966.
29. Рустамов, М. А. (2021). Методы термической обработки для повышения прочности зубчатых колес. Scientific progress, 2(6), 721-728.
30. Akbaraliyevich, R. M. (2022). Improving the Accuracy and Efficiency of the Production of Gears using Gas Vacuum Cementation with Gas Quenching under Pressure. Central Asian Journal of Theoretical and Applied Science, 3(5), 85-99.
31. Nomanjonov, S., Rustamov, M., Sh, R., & Akramov, M. (2019). STAMP DESIGN. Экономика и социум, (12 (67)), 101-104.
32. Akramov, M. M. (2021). Metallarni korroziyalanishi va ularni oldini olish samarodorligi. Scientific progress, 2(2), 670-675.
33. Акрамов, М. М. (2021). ДЕТАЛЛАРНИНГ ЮЗАЛАРИНИ КИМЁВИЙ-ТЕРМИК ИШЛОВ БЕРИШГА ҚАРАТИЛГАН ТАКЛИФЛАР. Scientific progress, 2(6), 123-128.
34. Акрамов, М. М. (2022). Краткая Характеристика Горячих Цинковых Покрытий. Central Asian Journal of Theoretical and Applied Science, 3(5), 232-237.
35. Акрамов, М. М. (2021). Повышение физико-механических свойств стальных деталей при пластической деформационной обработке. Scientific progress, 2(6), 129-133.
36. Улуғхожаев, Р. С. (2021). Ишлов берилаётган деталнинг аниқлигини ошириш учун метал қирқиш дастгохларини бошқаришда виброакустик сигналлардан фойдаланиш. Scientific progress, 2(6), 1241-1247.
37. Улуғхожаев, Р. С. (2021). КЕСИШ ЗОНАСИДА ҲОСИЛ БЎЛУВЧИ ВИБРОАКУСТИК СИГНАЛЛАРДАН ДЕТАЛНИНГ АНИҚЛИГИНИ НАЗОРАТ ҚИЛИШДА ФОЙДАЛАНИШ. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 114-123.
38. Улугхожаев, Р. С. (2022). Методы контроля точности при резания металлов. Science and Education, 3(11), 591-598.
39. Таджибаев, Р. К., Гайназаров, А. А., & Турсунов, Ш. Т. (2021). Причины Образования Мелких (Точечных) Оптических Искажений На Ветровых Стеклах И Метод Их Устранения. Central Asian Journal of Theoretical and Applied Science, 2(11), 168-177.
40. Гайназаров, А. Т., & Абдурахмонов, С. М. (2021). Системы обработки результатов научных экспериментов. Scientific progress, 2(6), 134-141.
41. Gaynazarov, A. T., & Rayimjonovich, A. R. (2021). ТЕОРЕТИЧЕСКИЕ ОСНОВЫ РАЗРАБОТКИ КЛЕЯ В ПРОЦЕССЕ СВАРКИ НА ОСНОВЕ ЭПОКСИДНОГО СПЛАВА ДЛЯ РЕМОНТА РЕЗЕРВУАРОВ РАДИАТОРА. Oriental renaissance: Innovative, educational, natural and social sciences, 1(10), 659-670.
42. Таджибаев, Р. К., Турсунов, Ш. Т., & Гайназаров, А. А. (2022). Повышения качества трафаретных форм применением косвенного способа изготовления. Science and Education, 3(11), 532-539.
43. Tursunov, S. T., & Sayfiev, B. X. (2022). Protection Against Counterfeit Products-An Important Guarantee of Your Safety. Eurasian Scientific Herald, 8, 181-187.
44. Tadjikuziyev, R. M., & Mamatqulova, S. R. (2023). Metal kukunli (poroshokli) maxsulotlar texnologiyasi. Science and Education, 4(2), 650-659.
45. Tadjikuziyev, R. M., & Mamatqulova, S. R. (2023). Rezina va nometal qismlarni ishlab chiqarish texnologiyasi. Science and Education, 4(2), 638-649.
46. Tadjikuziyev, R. M. (2022). Analysis of Pollution of Automobile Engines Operating in the Hot, HighDust Zone of Uzbekistan. Eurasian Journal of Engineering and Technology, 7, 15-19.
47. Tadjikuziyev, R. M. (2022). Technology of repair of press molds for production of machine parts from steel coils, aluminum alloys. American Journal Of Applied Science And Technology, 2(04), 1-11.
48. Nomanjonov, S. N. (2020). Increase The Wear Resistance And Service Life Of Dyes Based On Modern Technologies. The American Journal of Applied sciences, 2(12), 128-131.
49. Mamirov, A., & Omonov, A. (2020). Application of vacuum capturing devices in mechanical engineering. Интернаука, (42-2), 73-75.
50. Mukhammadyusuf, M., Sherzod, P., & Behzod, A. (2020). Study of compensation of reactive power of short-circuited rotor of asynchronous motor. ACADEMICIA: An International Multidisciplinary Research Journal, 10(5), 625-628.
51. Таиров, Ш. М., & Абдуллаев, Б. Б. У. (2020). Чрезвычайные и критические изменения климата в странах центральной Азии. Universum: технические науки, (2-1 (71)), 5-6.
52. Abdullayev, B. B. O. G. L. (2021). ZAMONAVIY ISSIQLIK ELEKTR MARKAZLARIDA QO ‘LLANILADIGAN ISSIQLIK IZOLYATSION MATERIALLAR VA ULARGA QO ‘YILADIGAN ASOSIY TALABLAR. Scientific progress, 2(8), 36-40.
53. Shermatov, B. A., & Abdullayev, B. B. (2022). Increasing The Efficiency Of Power Oil Transformers For Cleaning From Oil Compounds Developing A Regression Model For Determination Of Optimal Temperature Exit. Экономика и социум, (5-1 (96)), 200-204.
54. Munavvarhonov, Z., & Khakimov, R. (2021, April). GYPSUAL MATERIALS BASED ON LOCAL AND SECONDARY RAW MATERIALS FOR CONSTRUCTION PURPOSES. In International Scientific and Current Research Conferences (pp. 10-14).
55. Zokirkhon, M., Alisher, R., Avazbek, M., & Farhod, N. (2023). Methods and Means of Diagnosing EEMS (Electronic Engine Management System). Telematique, 7672-7674.
56. Мунаввархонов, З. Т. Ў., Талипов, Н. Х., Негматов, С., Солиев, Р., Мадрахимов, А. М., & Шарипов, Ф. Ф. (2021). ИССЛЕДОВАНИЕ ВЛИЯНИЯ МОДИФИЦИРУЮЩИХ ДОБАВОК НА СВОЙСТВА КОМПОЗИЦИОННЫХ ГИПСОВЫХ СМЕСЕЙ. Universum: технические науки, (11-2 (92)), 13-17.
57. Бойдадаев, М. Б. У., Мунаввархонов, З. Т. У., Мадрахимов, А. М., & Имомназаров, С. К. (2021). Гипсосодержащие материалы на основе местного и вторичного сырья в узбекистане. Universum: технические науки, (3-2 (84)), 26-29.
58. Рубидинов, Ш. Ғ. У., Ғайратов, Ж. Ғ. У., & Ахмедов, У. А. У. (2022). МАТЕРИАЛЫ, СПОСОБНЫЕ УМЕНЬШИТЬ КОЭФФИЦИЕНТ ТРЕНИЯ ДРУГИХ МАТЕРИАЛОВ. Scientific progress, 3(2), 1043-1048.
59. Мухаммаджонов, М. Ш. (2022). ФАКТОРЫ, ВЛИЯЮЩИЕ НА РАБОТЫ СИЛОВЫХ ТРАНСФОРМАТОРОВ. In Тинчуринские чтения-2022" Энергетика и цифровая трансформация" (pp. 340-342).
60. Yusupov, D. T., Muhammadjonov, M. S., & Qodirov, X. M. (2021). ELEKTR TA’MINOTI TIZIMIDA MAVJUD KUCH MOY TRANSFORMATORLARINING QIZISHIGA TASHQI TA’SIRLARNING TAHLILI. Scientific progress, 2(8), 14-20.
Published
2023-05-18
How to Cite
угли, Р. Ш. Г., & угли, У. М. Б. (2023). ИНТЕРНЕТ ВЕЩЕЙ (IOT) В МАШИНОСТРОЕНИИ: ПРИМЕНЕНИЕ И ПЕРСПЕКТИВЫ. CENTRAL ASIAN JOURNAL OF MATHEMATICAL THEORY AND COMPUTER SCIENCES, 4(5), 83-88. https://doi.org/10.17605/OSF.IO/FMQ7K
Section
Articles