АНАЛИЗ СУЩЕСТВУЮЩИХ КОНСТРУКЦИЙ СОРТИРОВОЧНЫХ МАШИН ДЛЯ ПЕРЕРАБОТКИ ТВЕРДЫХ БЫТОВЫХ ОТХОДОВ
Keywords:
анализ, сортировочная машина, подготовительная сортировка, твердые бытовые отходы
Abstract
статья посвящена анализу конструкций сортировочных машин для переработки твердых бытовых отходов. На основе анализа преимуществ и недостатков конструкций машин выбраны аналоги машин. При выборе аналога учтены не только конструктивные особенности, но и свойства перерабатываемых отходов.
References
1.Ханкелов Т.Қ., Мухамедова Н.Б., Аслонов Н.Р.,Илхомова М.Н. Устройство для сортировки твёрдых бытовых отходов//Электрон журнал: Транспорт Шёлкового Пути №1, 2020 г. С.33-42.
2.Ханкелов Т.К., Комилов С.И. Требование к уплотнению лессовых нрунтов земляного полотна.ТДТрУ.Science journal vehicles and road, 2023y, №1.Issue 1,2.
3.Ханкелов Т.К., Мухамедова Н.Б., Кудайбергенов М.С., Хамидов С.С. Қаттиқ маиший чиқиндиларни майдалаш чиқиндиларни майдалаш жараёни учун ўхшашлик критерийларини аниқлаш.Eurasian journal of academic research volume 2, Issue 13, December 2022, pp.533-537.
4.Khankelov T.K., Mukhamedova N.B., Komilov S.I., Mirxoliqov S.M. System of Indicators for Evaluating the Efficiency of Municipal mashines. International Journal of Advanced Research in Science, engineering and Technology.ISSN:2350-0328, Vol.9,Issue 11, November 2022.pp.20184-20187.
5.Ханкелов Т.Қ., Иброхимов С.И., Вахобов Ж.В. Ёнлама кенгайтиргич ва вертикал панжара билан жиҳозланган бульдозер отвали ёрдамида қаттиқ маиший чиқиндиларни қазиш жараёни математик модели. Eurasian journal of Law, Finance and Applied science.
6.Khankelov T.K., Mukhitdinov A.S. Alimov T.Y. Analysis of works Devoted to the study of the shape, of the transferse profile of the working bodies of the moldboard type. ISSN(E):2347-6415. Vol.10, Issue 6, June (2022).
7.Ханкелов Т.К., Мухамедова Н.Б.Устройство для сортировки твердых бытовых отходов оснащенной вращающимся ротором. International Scientific Conference “Innovative trends in Science practice and Education, 2023, Germany” .pp.116-121.
8. Khankelov T.K., Faiziev T.Z., Mukhamedova N.B.,Komilov S.I.Development of similarity criteria for the grinding process of solid household waste on ball,Mills. Voume 2, Issue 12, November 2022, ISSN 2184-2020, pp.372-375.
9. Ханкелов Т.Қ., Мухамедова Н.Б., Рашидов Б.У., Ниязов А.А. Система показателей оценки эффективности коммунальных машин. “Авиация ва космик технологияларда таълим ва илмнинг долзарб муаммолари” мавзусидаги Ҳалқаро илмий техник анжумани, 10ғ11 ноябрь, 2022 йил Ташкент, Узбекистоню Анжуман маърузалар тўплами, 380-385 бетлар.
10.Tavbay Khankelov, Nafisa Muxamedova. Determination of main parameters of the devise for sorting solid household waste. European science review. Vienna. 2017., №11-12, pp.160-163.
11. Isyanov, R., Rustamov, K., Rustamova, N., & Sharifhodjaeva, H. (2020). Formation of ICT competence of future teachers in the classes of general physics. Journal of Critical Reviews, 7(5), 235-239.
12. Juraboevich, R. K. (2020). Technical solutions and experiment to create a multipurpose machine. International Journal of Scientific and Technology Research, 9(3), 2007-2013.
13. Rustamov, K. J. (2021). Innovative Approaches and Methods in Teaching Technical Subjects. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12(5), 1861-1866.
14. Askarhodjaev, T., Rustamov, K., Aymatova, F., & Husenova, G. (2020). Justification of the hydraulic system parameters of the excavation body of a multi-purpose road construction vehicle based on the TTZ tractor. Journal of Critical Reviews. Innovare Academics Sciences Pvt. Ltd. https://doi. org/10.31838/jcr, 7, 40.
15. Rustamov, K. J. (2019). Experimental Work of the Hydraulic Equipment of the Multi-Purpose Machine Mm-1. International Journal of Recent Technology and Engineering (IJRTE) ISSN, 2277-3878.
16. Dj, R. K. (2019). Experimental Work of the Hydraulic Equipment of the Multi-Purpose Machine MM-1. IJRTE, November.
17. Rustamov, K. (2022). The Mathematical model of a positioning hydraulic drive: Mathematical model of a positioning hydraulic drive. Acta of Turin Polytechnic University in Tashkent, 12(2), 76-81.
18. Rustamov, K. J., & Tojiev, L. O. (2022). Types of Steering and Their Design Aspects. Indonesian Journal of Innovation Studies, 20, 10-21070.
19. Рустамов, К. (2021). ОБОСНОВАНИЕ ОПТИМАЛЬНЫХ УГЛОВ ПОЗИЦИОНИРОВАНИЯ РАБОЧЕГО ОБОРУДОВАНИЯ ПРИ КОПАНИИ ГРУНТА. Транспорт шелкового пути, (2), 54-59.
20. Рустамов, К. Ж. (2009). Анализ гидропривода современных строительно-дорожных машин. Строительные материалы, оборудование, технологии XXI века, (1), 44-44.
21. Rustamov, K. J. (2023). Technical and Economic Indicators of a Multi-Purpose Machine. Nexus: Journal of Advances Studies of Engineering Science, 2(2), 48-52.
22. Rustamov, K. J. (2023). Feasibility Study of the Designed Working Equipment of the MM-1 Machine. International Journal of Discoveries and Innovations in Applied Sciences, 3(2), 92-97.
23. Rustamov, K. J., & Bazarbaev, B. M. U. (2021). Theoretical study of the power balance of the equipment of a single bucket hydraulic excavator under the conditions of determining the productivity. In International Conference on Agriculture Sciences, Environment, Urban and Rural Development. (pp. 32-37).
24. Maksudov, Z. T., Kudaybergenov, M. S., Rustamov, K. J., & Mukhamedova, N. B. (2023). Issues of Development of an Industry Standard for Mechanized Costs of Single-Bucket Excavators in the Construction of Roads. Nexus: Journal of Advances Studies of Engineering Science, 2(5), 47-51.
25. Usmanov, I. I., Rustamov, K. J., Magdiyev, K. I., Kudaybergenov, M. S., & Ulashov, J. Z. (2023). Issues of Modernization of Mechanical Engineering on Innovative Basis. Nexus: Journal of Advances Studies of Engineering Science, 2(5), 1-4.
26. Astanakulov, K. D., Rustamov, K. J., & Ulashov, J. Z. (2023). Cutting Branches of Trees and Possibilities From Their Use. Nexus: Journal of Advances Studies of Engineering Science, 2(4), 74-83.
27. Rustamov, K., Usmanov, I., Komilov, S., Egamshukurov, P., & Pardaboyev, Z. (2023). Modern Practice of Ensuring the Operability of Construction Machines. Nexus: Journal of Advances Studies of Engineering Science, 2(3), 114-117.
28. Rustamov, K., Usmanov, I., Komilov, S., Egamshukurov, P., & Pardaboyev, Z. (2023). ASPECTS OF THE IMPACT OF TECHNICAL
2.Ханкелов Т.К., Комилов С.И. Требование к уплотнению лессовых нрунтов земляного полотна.ТДТрУ.Science journal vehicles and road, 2023y, №1.Issue 1,2.
3.Ханкелов Т.К., Мухамедова Н.Б., Кудайбергенов М.С., Хамидов С.С. Қаттиқ маиший чиқиндиларни майдалаш чиқиндиларни майдалаш жараёни учун ўхшашлик критерийларини аниқлаш.Eurasian journal of academic research volume 2, Issue 13, December 2022, pp.533-537.
4.Khankelov T.K., Mukhamedova N.B., Komilov S.I., Mirxoliqov S.M. System of Indicators for Evaluating the Efficiency of Municipal mashines. International Journal of Advanced Research in Science, engineering and Technology.ISSN:2350-0328, Vol.9,Issue 11, November 2022.pp.20184-20187.
5.Ханкелов Т.Қ., Иброхимов С.И., Вахобов Ж.В. Ёнлама кенгайтиргич ва вертикал панжара билан жиҳозланган бульдозер отвали ёрдамида қаттиқ маиший чиқиндиларни қазиш жараёни математик модели. Eurasian journal of Law, Finance and Applied science.
6.Khankelov T.K., Mukhitdinov A.S. Alimov T.Y. Analysis of works Devoted to the study of the shape, of the transferse profile of the working bodies of the moldboard type. ISSN(E):2347-6415. Vol.10, Issue 6, June (2022).
7.Ханкелов Т.К., Мухамедова Н.Б.Устройство для сортировки твердых бытовых отходов оснащенной вращающимся ротором. International Scientific Conference “Innovative trends in Science practice and Education, 2023, Germany” .pp.116-121.
8. Khankelov T.K., Faiziev T.Z., Mukhamedova N.B.,Komilov S.I.Development of similarity criteria for the grinding process of solid household waste on ball,Mills. Voume 2, Issue 12, November 2022, ISSN 2184-2020, pp.372-375.
9. Ханкелов Т.Қ., Мухамедова Н.Б., Рашидов Б.У., Ниязов А.А. Система показателей оценки эффективности коммунальных машин. “Авиация ва космик технологияларда таълим ва илмнинг долзарб муаммолари” мавзусидаги Ҳалқаро илмий техник анжумани, 10ғ11 ноябрь, 2022 йил Ташкент, Узбекистоню Анжуман маърузалар тўплами, 380-385 бетлар.
10.Tavbay Khankelov, Nafisa Muxamedova. Determination of main parameters of the devise for sorting solid household waste. European science review. Vienna. 2017., №11-12, pp.160-163.
11. Isyanov, R., Rustamov, K., Rustamova, N., & Sharifhodjaeva, H. (2020). Formation of ICT competence of future teachers in the classes of general physics. Journal of Critical Reviews, 7(5), 235-239.
12. Juraboevich, R. K. (2020). Technical solutions and experiment to create a multipurpose machine. International Journal of Scientific and Technology Research, 9(3), 2007-2013.
13. Rustamov, K. J. (2021). Innovative Approaches and Methods in Teaching Technical Subjects. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12(5), 1861-1866.
14. Askarhodjaev, T., Rustamov, K., Aymatova, F., & Husenova, G. (2020). Justification of the hydraulic system parameters of the excavation body of a multi-purpose road construction vehicle based on the TTZ tractor. Journal of Critical Reviews. Innovare Academics Sciences Pvt. Ltd. https://doi. org/10.31838/jcr, 7, 40.
15. Rustamov, K. J. (2019). Experimental Work of the Hydraulic Equipment of the Multi-Purpose Machine Mm-1. International Journal of Recent Technology and Engineering (IJRTE) ISSN, 2277-3878.
16. Dj, R. K. (2019). Experimental Work of the Hydraulic Equipment of the Multi-Purpose Machine MM-1. IJRTE, November.
17. Rustamov, K. (2022). The Mathematical model of a positioning hydraulic drive: Mathematical model of a positioning hydraulic drive. Acta of Turin Polytechnic University in Tashkent, 12(2), 76-81.
18. Rustamov, K. J., & Tojiev, L. O. (2022). Types of Steering and Their Design Aspects. Indonesian Journal of Innovation Studies, 20, 10-21070.
19. Рустамов, К. (2021). ОБОСНОВАНИЕ ОПТИМАЛЬНЫХ УГЛОВ ПОЗИЦИОНИРОВАНИЯ РАБОЧЕГО ОБОРУДОВАНИЯ ПРИ КОПАНИИ ГРУНТА. Транспорт шелкового пути, (2), 54-59.
20. Рустамов, К. Ж. (2009). Анализ гидропривода современных строительно-дорожных машин. Строительные материалы, оборудование, технологии XXI века, (1), 44-44.
21. Rustamov, K. J. (2023). Technical and Economic Indicators of a Multi-Purpose Machine. Nexus: Journal of Advances Studies of Engineering Science, 2(2), 48-52.
22. Rustamov, K. J. (2023). Feasibility Study of the Designed Working Equipment of the MM-1 Machine. International Journal of Discoveries and Innovations in Applied Sciences, 3(2), 92-97.
23. Rustamov, K. J., & Bazarbaev, B. M. U. (2021). Theoretical study of the power balance of the equipment of a single bucket hydraulic excavator under the conditions of determining the productivity. In International Conference on Agriculture Sciences, Environment, Urban and Rural Development. (pp. 32-37).
24. Maksudov, Z. T., Kudaybergenov, M. S., Rustamov, K. J., & Mukhamedova, N. B. (2023). Issues of Development of an Industry Standard for Mechanized Costs of Single-Bucket Excavators in the Construction of Roads. Nexus: Journal of Advances Studies of Engineering Science, 2(5), 47-51.
25. Usmanov, I. I., Rustamov, K. J., Magdiyev, K. I., Kudaybergenov, M. S., & Ulashov, J. Z. (2023). Issues of Modernization of Mechanical Engineering on Innovative Basis. Nexus: Journal of Advances Studies of Engineering Science, 2(5), 1-4.
26. Astanakulov, K. D., Rustamov, K. J., & Ulashov, J. Z. (2023). Cutting Branches of Trees and Possibilities From Their Use. Nexus: Journal of Advances Studies of Engineering Science, 2(4), 74-83.
27. Rustamov, K., Usmanov, I., Komilov, S., Egamshukurov, P., & Pardaboyev, Z. (2023). Modern Practice of Ensuring the Operability of Construction Machines. Nexus: Journal of Advances Studies of Engineering Science, 2(3), 114-117.
28. Rustamov, K., Usmanov, I., Komilov, S., Egamshukurov, P., & Pardaboyev, Z. (2023). ASPECTS OF THE IMPACT OF TECHNICAL
Published
2023-06-08
How to Cite
Т.Г.Ханкелов, К.Дж.Рустамов, С.С.Хамидов, С.С.Юсубжонов, & Ш.М.Абдукаримова. (2023). АНАЛИЗ СУЩЕСТВУЮЩИХ КОНСТРУКЦИЙ СОРТИРОВОЧНЫХ МАШИН ДЛЯ ПЕРЕРАБОТКИ ТВЕРДЫХ БЫТОВЫХ ОТХОДОВ. CENTRAL ASIAN JOURNAL OF MATHEMATICAL THEORY AND COMPUTER SCIENCES, 4(6), 72-79. Retrieved from https://cajmtcs.centralasianstudies.org/index.php/CAJMTCS/article/view/474
Section
Articles
